What is RRL?
RRL, or Response Rate Limiting, is an enhancement to implementations of the DNS protocol that can help mitigate DNS amplification attacks (see KB article AA-00897). In such an attack, the attacker sends high volumes of forged DNS queries to a large number of authoritative DNS servers, using the victim computer's IP address as the source of the request. The victim computer sees huge numbers of replies to questions that it did not ask. The authoritative servers have no way of knowing whether any particular DNS query is real or malicious, but can detect patterns and clusters of queries when they are abused at high volumes. If a goodly number of authoritative servers can all be tricked into sending high-volume replies to the same victim computer, it is quite likely to collapse from overload.
RRL helps mitigate DNS denial-of-service attacks by reducing the rate at which authoritative servers respond to high volumes of malicious queries. The RRL mechanism is part of BIND 9.10, and was available as a software build option in BIND 9.9.4.
Any internet protocol based on UDP is suitable for use in a denial-of-service attack, but DNS is especially well suited for such malevolence. There are three reasons:
- The User Datagram Protocol, or UDP, which is the norm for DNS traffic, was not designed with source validation in mind. DNS server software such as BIND cannot tell by examining a particular packet whether the source address in that packet is real or fraudulent. An attacker can therefore send DNS queries forged to look like they came from the intended victim, causing the DNS server to send the replies to that victim. This is a "reflected attack".
- Most ISPs do not check for forged source addresses in outbound packets. This allows forged-address reflection attacks to be launched from almost anywhere.
- Small DNS queries can generate large responses, allowing the attacker to send a lot less traffic than the victim receives, thereby amplifying the attack. For example, an EDNS query for the name isc.org of type ANY is 36 bytes long (not counting the wire headers) and triggers a response that is 3,576 bytes long. By using an authoritative DNS server as an unwitting accomplice, an attacker can achieve a nearly 100-fold increase in the amount of traffic that being directed at the victim and they can conceal the source of the attack as well.
If one packet with a forged source address arrives at a DNS server, there is no way for the server to tell it is forged. If hundreds of packets per second arrive with very similar source addresses asking for similar or identical information, there is a very high probability of those packets, as a group, being part of an attack. The RRL software has two parts. It detects patterns in arriving queries, and when it finds a pattern that suggests abuse, it can reduce the rate at which the replies are sent.
Operators of large authoritative servers have reported huge
reductions in network traffic and server load after enabling RRL.
Additionally, these servers are no longer seen as participating in
abusive network behavior as fewer illegitimate responses are reaching
their intended targets. The impact on legitimate traffic has been minimal.
For more information
KB article AA-00994 outlines how to use the RRL feature in BIND 9.10. As with all BIND features, the complete documentation is in the BIND Administrators' Reference Manual, the ARM. PDF and HTML versions of that manual are part of every release of BIND.
© 2001-2016 Internet Systems ConsortiumPlease help us to improve the content of our knowledge base by letting us know below how we can improve this article. If you have a technical question or problem on which you'd like help, please don't submit it here as article feedback. For assistance with problems and questions for which you have not been able to find an answer in our Knowledge Base, we recommend searching our community mailing list archives and/or posting your question there (you will need to register there first for your posts to be accepted). The bind-users and the dhcp-users lists particularly have a long-standing and active membership.ISC relies on the financial support of the community to fund the development of its open source software products. If you would like to support future product evolution and maintenance as well having peace of mind knowing that our team of experts are poised to provide you with individual technical assistance whenever you call upon them, then please consider our Professional Subscription Support services - details can be found on our main website.